Automation

The PhidgetInterfaceKit 0/16/16 provides: 16 Digital Inputs - with hardware noise filtering - sensing up to 30VDC 16 Digital Outputs cont...

The 1116 measures 3600 degrees of rotation - 10 full turns. It is typically used in Human Interface Applications such as control panels. Come...

Powered and Controlled by the USB bus. Relays - 4 with integrated snubbing of the normally open terminals Power - Powered by standard USB bus Cont...

Provides arc suppression for switching inductive AC loads on relays. The snubber can be simply wired across the common and switched contact to stop...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

Take control of and monitor your world with our ultimate jack-of-all-trades Raspberry Pi HAT! We've pulled together a great set of features into...

dS378 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS378...

Product Features For OEMs and Systems Integrators Small: DIP-36 package Includes a mini-USB connector Product Description Prov...

You can use the PhidgetIR to control devices with remote control input - such as your TV or DVD player, from your computer by having the Phidge...

Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option of ASCII, Binary or Modb...

Regulate the power to a variety of electronics with this four Relay Shield for Photon ! The Relay Shield allows you to control any normal outlet...

The BT004 provides four volt free contact relay outputs with a current rating of up to 16Amp each controlled over a HC06 Bluetooth serial port. Th...

ETH8020 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the ETH...

Controlling the power circuits of as many as four separate devices is a snap with this relay module. Each mechanical relay can control a separate c...

If you need to read a whole bunch of logic-level signals, this input module adds sixteen active-high digital inputs using just one port on your VI...

If you need to expand the number of digital inputs on your VINT Hub, this module provides four extra inputs at minimal cost. Switches, buttons, or...

The 1067 – PhidgetStepper Bipolar HC allows you to control the position, velocity, and acceleration of one bipolar stepper motor. This is the produ...

The PhidgetLED 64 allows you to independently control 64 Light Emitting Diodes. Each LED can have the current limit set individually, and the brig...

The PhidgetInterfaceKit 0/0/8 provides small signal relays with 8 relay outputs, rated at a combination of 250VAC, or 2 Amps, up to a maximum of 60...

Powered and Controlled by the USB bus. Relays - 6 with integrated snubbing of the normally open terminals Power - Powered by standard USB bus Cont...

The HUB0001 is a drop-in replacement for the HUB0000, supported by Phidget22 version 1.8 or newer. HUB0001 will enable data rate increases of up t...

Measure relative humidity from 0 to 100% and temperature from -40°C to +85°C. Measure relative humidity and air temperature, in non-condensing e...

The PhidgetSpatial Precision 3/3/3 combines the functionality of a 3-axis compass, a 3-axis gyroscope, and a 3-axis accelerometer all in one conve...

The TMP4104 thermocouple can measure temperatures between -40°C to +400°C with a ±0.75°C accuracy. The thermocouple wire is insulated with fiberg...