3pi+ 2040 Control Board

This is the control board for the 3pi+ 2040 robot, and it is included as part of the Standard Edition, Turtle Edition, and Hyper Edition 3pi+ 2040 kits and robots. It can be used as a replacement part for those products, or it can be assembled with the 3pi+ Chassis Kit , a pair of 6V Micro Metal Gearmotors with extended motor shafts , and a graphical OLED display to create a “custom edition” 3pi+ 2040 robot .

Overview

The 3pi+ 2040 Control Board is designed to be assembled with a 3pi+ Chassis Kit , a pair of 6V Micro Metal Gearmotors with extended motor shafts , and a graphical OLED display to create a 3pi+ 2040 robot. This product is primarily intended as a replacement product for the 3pi+ 2040 robots and kits that already include it or for those who want to build a 3pi+ 2040 robot with different gearmotor versions than the ones offered with those complete kits and assembled robots.

This control board is already included as part of the following 3pi+ 2040 assembled robots and kits:

• 3pi+ 2040 Robot – Standard Edition (30:1 MP Motors), Assembled
• 3pi+ 2040 Robot – Turtle Edition (75:1 LP Motors), Assembled
• 3pi+ 2040 Robot – Hyper Edition (15:1 HPCB Motors), Assembled
• 3pi+ 2040 Robot Kit with 30:1 MP Motors (Standard Edition Kit)
• 3pi+ 2040 Robot Kit with 75:1 LP Motors (Turtle Edition Kit)
• 3pi+ 2040 Robot Kit with 15:1 HPCB Motors (Hyper Edition Kit)

Included components

The 3pi+ 2040 Control Board ships with all of its surface-mount components populated, and it includes the following through-hole parts and mounting hardware:

• one buzzer
• jumper wires for soldering motors to the board
• two magnetic encoder discs
• one low-profile 1×7 male header for use with a graphical OLED display (not included)
• four single battery contacts
• four 3/16″ #2-56 screws , two 1/4″ #2-56 standoffs , and four nuts for mounting the board to a 3pi+ Chassis and an OLED display to the board

Please note that assembly (including soldering) is required; see the user's guide for assembly instructions.

What else will you need

To build a robot with the 3pi+ 2040 Control Board, you will need a few additional parts:

• a 3pi+ Chassis Kit
• two Micro Metal Gearmotors with extended motor shafts (6V MP or 6V HPCB versions recommended)
• a graphical OLED display (this is not required for operation, but it is strongly recommended)
• four AAA batteries : the 3pi+ chassis and control board work with both alkaline and NiMH batteries, though we recommend rechargeable NiMH cells
• a USB A to Micro-B cable to connect the robot to your computer for programming and debugging
• tools to help with kit assembly; see the user's guide for a list of specific tools

Optional accessories

You might also consider getting these for your 3pi+ 2040 robot:

• more sensors
• connectors (headers, jumper wires, etc) for adding those sensors or other peripherals to the 3pi+ 2040 expansion ports