Pololu

This small lidar-based distance sensor reports the distance of objects up to about 130 cm (50″) away with a pulsed signal similar to a hobby servo...

This small lidar-based distance sensor detects the presence of objects within 100 cm (39″) . It has a single digital output that drives low when a...

This small lidar-based distance sensor detects the presence of objects within 25 cm (10″) . It has a single digital output that drives low when an...

This small lidar-based distance sensor detects the presence of objects within 50 cm (20″) . It has a single digital output that drives low when an...

This small lidar-based distance sensor detects the presence of objects within 15 cm (6″) . It has a single digital output that drives low when an ...

This small lidar-based distance sensor reports the distance of objects up to about 50 cm (20″) away with a pulsed signal similar to a hobby servo ...

This small lidar-based distance sensor detects the presence of objects within 10 cm (4″) . It has a single digital output that drives low when an ...

This small lidar-based distance sensor detects the presence of objects within 5 cm (2″) . It has a single digital output that drives low when an o...

This ball caster uses a 3/4″ diameter metal ball. The height of the assembled kit ranges from 0.8″ to 1.1″, depending on the combination of includ...

This ball caster uses a 1″ diameter plastic ball and has an overall height of 1.1″ (29 mm). The two-part housing snaps together to securely enclos...

This light ball caster uses a 1″ diameter plastic ball. The height of the assembled kit ranges from 1.1″ to 1.4″, depending on the combination of ...

This light ball caster uses a 3/4″ diameter plastic ball. The height of the assembled kit ranges from 0.9″ to 1.2″, depending on the combination o...

This ball caster uses a 1/2″ diameter metal ball. The height of the assembled kit ranges from 0.5″ to 0.8″, depending on the combination of includ...

This light ball caster uses a 1/2″ diameter plastic ball. The height of the assembled kit ranges from 0.5″ to 0.8″, depending on the combination o...

This small ball caster uses a 3/8″ diameter metal ball. The height of the assembled kit ranges from 0.4″ to 0.6″, depending on the combination of ...

This small, light ball caster uses a 3/8″ diameter plastic ball. The height of the assembled kit ranges from 0.4″ to 0.6″, depending on the combin...

This ball caster was originally released as a replacement part for the 3pi robot , but the 1/2″ ball can also be used a replacement part for the ne...

This two-part aluminum assembly mounts directly to 1/4 inch diameter motor output shafts like those on our NEMA 23 stepper motors and allows you to...

This two-part aluminum assembly mounts directly to 5 mm diameter motor output shafts like those on many of our stepper motors and allows you to dri...

This chassis base plate is a round piece of 1/8" (3 mm) acrylic with a 5" (127 mm) diameter and cutouts for building a differential-drive robot ch...

This two-part aluminum assembly mounts directly to 4 mm diameter motor output shafts like those on our 25D mm gearmotors and allows you to drive m...

This chassis base plate is a round piece of 1/8" (3 mm) acrylic with a 5" (127 mm) diameter and cutouts for building a differential-drive robot ch...

This chassis base plate is a round piece of 1/8" (3 mm) acrylic with a 5" (127 mm) diameter and cutouts for building a differential-drive robot ch...

This chassis base plate is a round piece of 1/8" (3 mm) acrylic with a 5" (127 mm) diameter and cutouts for building a differential-drive robot ch...