Pololu

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 50 V and efficiently reduces it to 5 V. The board me...

The compact (0.4″ × 0.5″) D24V6F12 switching step-down (or buck) voltage regulator takes an input voltage between 15 V and 42 V and efficiently red...

The compact (0.4″ × 0.5″) D24V5F5 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 5 V while ...

The compact (0.4″ × 0.5″) D24V3F5 switching step-down (or buck) voltage regulator takes an input voltage between 7 V and 42 V and efficiently redu...

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board me...

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 9 V. The board me...

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V. The board m...

This small synchronous switching step-down (or buck) regulator takes an input voltage from 4 V to 36 V and efficiently reduces it to 3.3 V. The boa...

The compact (0.5″ × 0.7″) D24V10F12 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V whi...

The compact (0.5″ × 0.7″) D24V10F5 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 5 V while...

The compact (0.5″ × 0.7″) D24V10F3 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 3.3 V whil...

This board is a simple carrier of Allegro's ±31 A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-...

This device is a programmer for AVR-based controllers, such as our Orangutan robot controllers and the 3pi robot. The programmer emulates an STK500...

This in-system programmer can be used to program AVR microcontrollers and AVR-based controller boards, such as our A-Star 328PB Micro, Orangutan r...

This board is a simple carrier of Allegro's ±15.5 A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a lo...

This breakout board for Texas Instruments's TPS2113A autoswitching power multiplexer allows you to select which of two power sources is connected t...

This simple board breaks out the power, USB 2.0 data, configuration, and sideband pins of a USB Type-C connector to a 0.1″ spacing that is compati...

This sensor is a carrier/breakout board for ST's VL53L1X laser-ranging sensor, which offers fast and accurate ranging up to 4 m . It uses the time ...

This sensor is a carrier/breakout board for ST's VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away. The VL53...

This carrier board for ST's VNH5019 motor driver IC operates from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak). It works with 2.5 to 5...

This breakout board makes it easy to use Toshiba's TB9051FTG brushed DC motor driver. It has a wide operating voltage range of 4.5 V to 28 V and ca...

This tiny board is an easy way to use Toshiba's TB6612FNG dual motor driver, which can independently control two bidirectional DC motors or one bip...

This breakout board makes it easy to use Toshiba's TB67H420FTG brushed DC motor driver, which can operate in either dual-channel mode for independe...

This compact breakout board makes it easy to use Allegro's A4990 dual motor driver, which can control two bidirectional DC motors over a wide oper...