Robotics

Connect this to that with a set-screw coupler. These couplers are made of machined aluminum and have a spiral cut that makes them slightly flexibl...

Connect this to that with a set-screw coupler. These couplers are made of machined aluminum and have a spiral cut that makes them slightly flexibl...

This ball caster kit includes a black ABS housing, a 12.70mm diameter metal ball, two spacers (1.58mm and 3.18mm thick), and two #2 screw sets. ...

Hex. Standoffs M/F 3 MA L=15 mm Pack= 5 pcs

This ball caster kit includes a black ABS housing, a 19.05mm diameter plastic ball, two spacers (1.58mm and 3.18mm thick), and two #2 screw sets...

Hex. Standoffs M/F 3 MA L=20 mm Pack= 5 pcs

Hex. Standoffs M/F 3 MA L=7 mm Pack= 10 pcs

These new hard plastic wheels are specially designed for our SBGM2, SBGM3, SBGM9 gear motor output shafts. Although usable as wheels, we often use...

These aluminum gearmotor brackets let you mount Pololu's 37D mm metal gearmotors to your project. The brackets are sold in pairs , and each bracke...

Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a pro...

Hex. Standoffs M/F 3 MA L=8 mm Pack= 10 pcs

This linear ball bearing is sort of the opposite of the radial ball bearings you may be familiar with. Its intended to slide along an 8mm linear s...

Hex. Standoffs M/F 3 MA L=50 mm Pack= 5 pcs

Timing belts are a fantastic way to transfer rotational motion (from a stepper motor) into linear motion (along a rail) and these GT2 belts are ex...

This black anodized aluminum bracket lets you securely mount typical NEMA 14-size stepper motors to your project. The bracket features several slo...

This ball caster uses a 1″ diameter plastic ball and has an overall height of 1.1″ (29 mm). The two-part housing snaps together to securely enclos...

Hex. Standoffs M/F 3 MA L=40 mm Pack= 5 pcs

Hex. Standoffs F/F 3 MA L=40 mm Pack= 5 pcs