cards & micros

The new version is available: ETH008-B - 8 relay outputs at 16A Overview The ETH008 provides eight volt free contact relay outputs with a c...

PRODUCT DISCONTINUED, REPLACED BY THE NEW VERSION The USB-RLY02 provides two volt free contact relay outputs with a current rating of up t...

The USB-RS485 module provides an easy to use RS485 interface by means of a Virtual Com Port on the users system. There are no command structure...

The ETH002 provides two volt free contact relay outputs with a current rating of up to 16Amp each. The module is powered from a 12vdc supply which ...

Relays - 8 Isolated Inputs - 8 Power - Powered by standard USB bus Control interface - USB Input Voltage - 4.5v DC to 27v DC Relay current - Up to...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

The I2C-LVL01 performs bi-directional I2C level conversion between any two levels: 1.65v to 5.5v. The connection pins are on a standard 0.1" spaci...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

ETH002 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the ETH0...

The USB-RLY82 provides two volt free contact relay outputs with a current rating of up to 1Amp each. It is powered by any standard USB bus and has ...

The USB-RLY16 provides eight volt free contact relay outputs with a current rating of up to 16Amp each. The processor is powered and instructed...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

ETH008 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the ETH0...

Number of Relay's - 8 Power - 5v @ 100mA max. Control interface - Serial or I2C Relay current - ...

Overview The USB-OPTO-RLY816 provides eight optically isolated inputs and eight volt free contact relay outputs with a current rating of up to ...

Overview A low power version of the USB-RLY16 module, the USB-RLY16L is powered solely by the USB bus and provides eight volt free contact relay o...

The DMX-USB-RX-RLY8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC ...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

A good looking professional case for the ETH484 module. Includes mounting holes for fixing to a wall or back panel. This precision snap together c...

The USB-GPIO12 is a general purpose processor module using the PIC18F14K50. This chip has a USB module built in which we have used to implement ...

Controlled over WIFI using preprogrammed command sets or html page. The ESP32LR42 is a WIFI connected relay module using the popular ESP32. It p...

The WIFI484 provides four volt free contact relay outputs with a current rating of up to 16Amp each, 8 digital I/O and 4 analogue inputs. The modu...

The DMX-USB-RX-D8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC or...