cards & micros

The WIFI484 provides four volt free contact relay outputs with a current rating of up to 16Amp each, 8 digital I/O and 4 analogue inputs. The modu...

The DMX-USB-RX-D8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC or...

The MIDI-RLY8 provides 8 relay outputs that respond to midi note or control change messages, these can be either mechanical or solid state relays....

Controlled over Ethernet using simple TCP/IP commands. Relays - 2 Power - 12V DC adapter, supplied separately Configuration & Test interface -...

Controlled over Ethernet using simple TCP/IP commands. Relays - 8 Power - 12V DC adapter, supplied separately. Configuration & Test interface ...

Powered and Controlled by the USB bus. The relays used on this board are premium ultra low power 50mW coil types, this means the boards curren...

Powered and Controlled by the USB bus. Relays - 2 with integrated snubbing of the normally open terminals Power - Powered by standard USB bus Cont...

The DMX-USB-RX-A8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 18VAC su...

Controlled over WIFI using preprogrammed command sets or html page. The ESP32LR88 is a WIFI connected relay module using the popular ESP32. It p...

Picmicro develop module, DIL format with Microchip USB HID bootloader preloaded. The module can be used on veroboards. Specifications 0.8"...

The SCR02 is a sensor controlled relay module capable of autonomous operation. The SRC02 may be connected to most of our ultrasonic rangers or t...

dS3484 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS34...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

The WIFI002 provides 2 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from a 12vdc supply which ...

The USB-I2C module provides a complete interface between your PC and the I2C bus. The module is self powered by the USB cable and can supply up ...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

The DMX-USB-RX-RLY8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC ...

dS2824 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS28...

Picmicro develop module, DIL format with Microchip USB HID bootloader preloaded. The module can be used on veroboards. Specifications 0.8" ...

Picmicro develop module, DIL format with Microchip USB HID bootloader preloaded. The module can be used on veroboards. Specifications 0.8"...

The WIFI008 provides 8 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from a 12vdc supply which c...

dS1242 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS124...

If you have more than 32 devices on your DMX cable, you need to provide a Splitter/Buffer to maintain the DMX signal quality. This 4 Way Optically...

The DMX-USB-RX-RLY8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC ...