cards & micros

This is a breakout for the BC127 Bluetooth Module. The BC127 is a highly flexible, low power, small form factor Bluetooth Version 4.0 Certified Au...

The PICAXE-28X2 shield base has been designed to be compatible with almost all 'shield modules' as used with the Arduino system. This allows use o...

The CY7C65213 USB to UART serial breakout is designed to provide users with a means to access all available I/O pins on the IC, and to provide a 6-...

Please note: this SD card image is suitable only for A13-OLINUXINO-MICRO and doesn't work with A13-OLINUXINO nor with A13-OLINUXINO- FEATURE...

Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option of ASCII, Binary or Modb...

Powered and Controlled by the USB bus. Relays - 4 with integrated snubbing of the normally open terminals Power - Powered by standard USB bus Cont...

Provides arc suppression for switching inductive AC loads on relays. The snubber can be simply wired across the common and switched contact to stop...

The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a...

A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit ! This HAT-li...

A great bundle of things you need to get up and running with the new Pi Zero W! Including an SD card with pre-loaded operating system, a smart a...

iceWerx iCE40-HX8K FPGA 4 10-bit Analogue input channels via onboard PIC. 63 FPGA I/O pins available (3.3 volts). iCE40 HX FPGA: 7680 Logic ce...

The SmartiPi Touch is a case and stand for the official Raspberry Pi 7" Touchscreen LCD. The display securely fits into the case with four screws, ...

Give your Pi a stylish, solid and sweet home! This elegantly crafted Raspberry Pi model B+/Pi 2 model B case is designed for the perfect combinatio...

The ATmega128RFA1 is a portmanteau of sorts – two separate components combined to form one device; half microcontroller, half RF transciever. ATme...

The Pi Zero USB Stem is a PCB kit that turns a Raspberry Pi Zero into a USB dongle. Once the Stem is installed, your Raspberry Pi can be...

BOOTABLE MICRO SD CARD WITH DEBIAN IMAGE Please note: this SD card is suitable only for A20-OLinuXino-LIME2 and A20-OLinuXino-LIME-4GB

BOOTABLE MICRO SD CARD WITH DEBIAN IMAGE Please note: this SD card is suitable only for A20-OLinuXino-LIME

BOOTABLE MICRO SD CARD WITH ANDROID IMAGE Please note: this SD card is suitable only for A20-OLinuXino-LIME

The uLog is a tiny analog logging device. Central to the logger is an ATtiny24 mated with an AT45DB161D 16Mbit flash IC. Sampling at 50Hz, it'll...

The BT004 provides four volt free contact relay outputs with a current rating of up to 16Amp each controlled over a HC06 Bluetooth serial port. Th...

ETH8020 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the ETH...

Adafruit seesaw is a near-universal converter framework which allows you to add and extend hardware support to any I2C-capable microcontroller or ...

The SparkFun 16-Pin SSOP to DIP Adapter is a small PCB that lets you adapt SSOP packages into a DIP footprint. These small boards are useful for m...

Teensy 4.0 is the latest Teensy, offering the fastest microcontroller and powerful peripherals in the Teensy 1.4 by 0.7 inch form factor. Feature...