TSA01- Analog Temperature Sensor
All prices are VAT included
The TSA01 is a voltage output temperature sensor module employing Microchip's MCP9700A sensor.
| Specification | ||
| Operating Voltage | 2.3v to 5.0v | |
| Operating Current | 6uA (typical) | |
| Outputs | 10.0 mV/°C (typical) | |
| Output Voltage at 0°C | 500mV | |
| Range | 40°C to +125°C | |
| Accuracy | ±1°C (typ.) ±2°C (max.), 0°C to +70°C |
Connectivity
The TSA01 should be connected to your controller using shielded twin core cable .
The shield is the 0v ground connection.
One of the cores carries the supply voltage, marked as 5v on the PCB.
The other core carries the temperature voltage, marked as T on the PCB.
Do not power the module from a higher voltage as there are ESD protection diodes on the board that start conducting at around 6v.
Enclosures
We do not supply an enclosure for these, however you do have a couple of choices.
The module is designed to fit a Schneider NSYTBS775 enclosure (RS 2550359430).
If you have access to a 3D printer then you can print your own case from the following STL files.
Base.stl Lid.stl