Sensors

The Slider 60 is a linear potentiometer - the resistance varies linearly with the position of the slider. SensorValue varies from 0 to1000 over t...

This reflectance sensor module is designed for use with the Zumo shield for Arduino . It has six IR LED/phototransistor pairs that can be used for ...

Need to put your finger on the pulse of the Earth? Did I just blow your mind? A geophone works by translating ground movement into voltage, which ...

Force-sensing linear potentiometers (FSLPs) from Interlink Electronics are passive components with resistances that depend on the magnitude and lo...

The ADXL377 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned analog voltage outputs that has a full-scale range ...

Using our muscles to control things is the way that most of us are accustomed to doing it. We push buttons, pull levers, move joysticks… but what ...

The INA169 is a “high-side current monitor,” which means that you place a resistor (a “shunt resistor”) on the positive power rail and the INA169 ...

This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a line-following robot. Pairs of LE...

The 3550 is an economical combination electrode ideal for your general-purpose applications in the lab or field. It has the impact-resistant q...

This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. Whil...

This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor's resistance. Pressing hard, the resistance changes ...

The IR Distance Adapter is designed to interface the Sharp GP2D12 sensor to the PhidgetInterfaceKit 8/8/8 or the PhidgetTextLCD. The Sharp GP...

The LS20031 GPS receiver is a complete 5Hz GPS smart antenna receiver, that includes an embedded antenna and GPS receiver circuits. This low-cos...

This sensor is a carrier/breakout board for ST's VL53L1X laser-ranging sensor, which offers fast and accurate ranging up to 4 m . It uses the time ...

The SparkFun BME280 Atmospheric Sensor Breakout is the easy way to measure barometric pressure, humidity, and temperature readings all without tak...

Sometimes a simple analog control device can be the perfect tactile solution for your project, but they can be surprisingly hard to come by. Lucki...

This little sensor is a great way to add UV light sensing to any microcontroller project. The VEML6070 from Vishay has a true UV A light sensor and...

The VCNL4010 sensor is a nice way to add a small-distance proximity sensor to your microcontroller project. For longer distances (in the range of c...

The PhidgetSpatial 3/3/3 combines the functionality of a 3-axis compass, a 3-axis gyroscope, and a 3-axis accelerometer all in one convenient packa...

The SHT15 Breakout is an easy to use, highly accurate, digital temperature and humidity sensor. This board has been fully calibrated and offers hi...

The SparkFun 9DoF Razor IMU M0 combines a SAMD21 microprocessor with an MPU-9250 9DoF (9 Degrees of Freedom) sensor to create a tiny, reprogrammab...

A load cell is a force sensing module - a carefully designed metal structure, with small elements called strain gauges mounted in precise locations...

The TSA01 is a voltage output temperature sensor module employing Microchip's MCP9700A sensor. Specification Operating Voltage...

DHT22 capacitive humidity sensing digital temperature and humidity module is one that contains the compound has been calibrated digital signal out...