Sensors

A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - t...

The RHT03 (also known by DHT-22) is a low cost humidity and temperature sensor with a single wire digital interface. The sensor is calibrated and ...

The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to the Celsius t...

This is the latest DS18B20 1-Wire digital temperature sensor from Maxim IC. Reports degrees C with 9 to 12-bit precision, -55C to 125C (+/-0.5C). ...

This is a joystick very similar to the 'analog' joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometer...

Miniaturized receiver for IR control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter...

This non-invasive current sensor (also known as a "split core current transformer") can be clamped around the supply line of an electrical load to...

Product Features Maximum Load Capacity: 5kg Wheatstone Bridge Sensor Small: 55.25 x 12.7 x 12.7mm Plugs into the 1046 – Phidget...

Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible I...

This force-sensing resistor (FSR) from Interlink Electronics is a passive component that acts as a variable resistor, with resistance decreasing...

Product Features Maximum Load Capacity: 50kg Wheatstone Bridge Sensor Small: 55.25 x 12.7 x 12.7mm Plugs into the 1046 – Phidget...

The Infrared Receiver is used to receive infrared signals and also used for remote control detection. There is an IR detector on the Infrared Re...

Product Features Maximum Load Capacity: 20kg Wheatstone Bridge Sensor Small: 55.25 x 12.7 x 12.7mm Plugs into the 1046 – PhidgetBri...

This temperature & humidity sensor provides a pre-calibrated digital output. A unique capacitive sensor element measures relative humidity and...

The Infrared Emitter is used to transmit infrared signals through an infrared LED, while there is an Infrared receiver to get the signals on the ...

Product Features Maximum Weight: 780g Wheatstone Bridge Sensor Small: 45 x 9.3 x 6mm Plugs into the 1046 – PhidgetBridge 4-Inpu...

Datasheet PDF (230K)

This force-sensing resistor (FSR) from Interlink Electronics is a passive component that acts as a variable resistor, with resistance decreasing...

This 3-axis Accelerometer module is based on MMA7660FC with Digital Output I2C. This Module can be used for sensing data changes, pr...

This board is a simple carrier of Allegro's ±15.5 A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a lo...

This pressure sensor from Freescale is a great low-cost sensing solution for measuring barometric pressure. At 1.5 hPa resolution, it's not as pre...

This alcohol sensor is suitable for detecting alcohol concentration on your breath, just like your common breathalyzer. It has a high sensitivit...

This is a simple-to-use compressed natural gas (CNG) sensor, suitable for sensing natural gas (composed of mostly Methane [CH4]) concentrations in...