Sensors

This is a breakout board for the ultra low-power LIS331HH three axis linear accelerometer. The device has a digital I2C/SPI serial interface whic...

The ADXL377 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned analog voltage outputs that has a full-scale range ...

Product Features Maximum Weight: 50kg Wheatstone Bridge Sensor Individually calibrated at the factory Plugs into the 1046 – Phidget...

Temperature sensor with a range of -50°C to +150°C with a typical error of ±0.75°C in the 0°C to 100°C range. Comes packaged with a 60cm Sens...

This is the T5403 breakout board, a fully calibrated barometric pressure sensor with an I 2 C interface. The T5403 sensor measures the absolute pre...

BMP085 is barometric pressure digital sensor which measures pressure in range 300..1100hPa (+9000m .. -500m above sea level) BMP085 is with I2C i...

The VL6180X (sometimes called the VL6180 ) is a Time of Flight distance sensor like no other you've used! The sensor contains a very tiny laser so...

This force-sensing linear potentiometer (FSLP) from Interlink Electronics is a passive component with resistances that depend on the magnitude and ...

The smallest, most powerful, and most versatile GPS receiver we carry just got more powerful.The Venus638FLPx is the successor to the Venus634LP...

The 3561 roll ball switch will turn the digital input "on" when the roll ball is depressed, and will turn "off" when the ball is released. P...

This miniature joystick has two axes and a pushbutton. Each axis, up/down and left/right, has a potentiometer with a center value of approximatel...

The 1109 can be rotated 300 degrees and outputs a number between 0 and 1000 based on the shaft position. Comes packaged with a 60cm Sensor Cable....

This type of photoresistor is made of environment-friendly materials(no Cadmium and Lead) compared with the traditional CDS photoresistor. It chan...

The Si7021 is a low-cost, easy-to-use, highly accurate, digital humidity and temperature sensor. This sensor is ideal for environmental sensing and...

This sensor is a carrier/breakout board for ST's VL53L1X laser-ranging sensor, which offers fast and accurate ranging up to 4 m . It uses the time ...

The 1146 IR Reflective Sensor uses an infra-red LED and a phototransistor to measure the distance of an object between 1mm and 4mm away. This senso...

This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the tw...

This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I 2 C and SPI interface. This MEMS pressure sensor...

The TSA01 is a voltage output temperature sensor module employing Microchip's MCP9700A sensor. Specification Operating Voltage...

This sensor can detect the presence of a highly reflective object at 10cm. For less reflective objects (like hands) the distance is about 5cm. ...

A load cell is a force sensing module - a carefully designed metal structure, with small elements called strain gauges mounted in precise locations...

MOD-TC-MK2-31855 is an upgrade over MOD-TC in a lot of ways. It comes with firmware allowing easier I2C interfacing to host boards via simple UEXT ...

The 1142 Light sensor can measure ambient light up to 1000 lux (roughly equivalent to the typical lighting in a studio, or the sky on an overcast d...

This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. ...