Sensors

This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the tw...

The SHT15 Breakout is an easy to use, highly accurate, digital temperature and humidity sensor. This board has been fully calibrated and offers hi...

The SparkFun 9DoF Razor IMU M0 combines a SAMD21 microprocessor with an MPU-9250 9DoF (9 Degrees of Freedom) sensor to create a tiny, reprogrammab...

This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I 2 C and SPI interface. This MEMS pressure sensor...

The TSA01 is a voltage output temperature sensor module employing Microchip's MCP9700A sensor. Specification Operating Voltage...

This sensor can detect the presence of a highly reflective object at 10cm. For less reflective objects (like hands) the distance is about 5cm. ...

DHT22 capacitive humidity sensing digital temperature and humidity module is one that contains the compound has been calibrated digital signal out...

This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load...

A load cell is a force sensing module - a carefully designed metal structure, with small elements called strain gauges mounted in precise locations...

MOD-TC-MK2-31855 is an upgrade over MOD-TC in a lot of ways. It comes with firmware allowing easier I2C interfacing to host boards via simple UEXT ...

Add motion, direction and orientation sensing to your Arduino project with this all-in-one 9-DOF sensor. Inside the chip are three sensors, one is...

The 1142 Light sensor can measure ambient light up to 1000 lux (roughly equivalent to the typical lighting in a studio, or the sky on an overcast d...

HMC5883L is 3-Axis Digital Compass with 12-bit ADC that enables 1° to 2° compass heading accuracy. HMC5883L uses I2C communication interface and...

This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. ...

The FlexiForce sensor is an ultra-thin and flexible printed circuit, which can be easily integrated into most applications. With its paper-thi...

This RTC module is specifically designed for the Raspberry Pi. It communicates with Raspberry Pi through I2C bus and includes a Maxim DS1307 and C...

This little USB port go-between is like a speed gauge for your USB devices. Instead of hauling out a multimeter and splicing cables, plug this in b...

These simple switches are the Mechanical Bumper sensor for the SparkFun RedBot, giving you the ability to detect a collision before it really happe...

Measures Relative Humidity from 10% to 95% with a typical error of ±2%RH at 55% RH. Measures Ambient Temperature in the range of -40°C to +100°...

The 1122 measures AC current up to 30 Amps and DC Current from -30Amps to +30Amps. Dual outputs allow the user to measure both the AC and DC comp...

Based around the fantastic BNO055 9 axis absolute orientation sensor from Bosch our module offers supply regulation and comms level translation, t...

Add quadrature encoders to your micro metal gearmotors ( extended back shaft version required) with this kit that uses a magnetic disc and Hall eff...

Utilizing the fantastic AMG8833 thermopile array from Panasonic, the TPA64 offers an economical but powerful temperature imaging solution. Vi...

This is the LIDAR-Lite v3, a compact, high-performance optical distance measurement sensor from Garmin™. When space and weight requirements are tig...