Sparkfun

This aluminum adapter converts the very common 1/4\" thread found on camera tri-pods and mono-pods to the 5/8\" 11-TPI (threads per inch) found on ...

The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users, it keeps your ...

This is a 50mm long 4-conductor cable with 1mm JST termination. It's designed to connect Qwiic enabled components together but can be used for oth...

This is a 200mm long 4-conductor cable with 1mm JST termination. It's designed to connect Qwiic enabled components together but can be used for oth...

This is a 100mm long 4-conductor cable with 1mm JST termination. It's designed to connect Qwiic enabled components together but can be used for ot...

This is a 500mm long 4-conductor cable with 1mm JST termination. It's designed to connect Qwiic enabled components together but can be used for ot...

The micro:bit Edge Connector allows you to expand the capabilities of the [micro:bit](https://www.sparkfun.com/products/14208) development platfor...

The micro:bit Edge Connector allows you to expand the capabilities of the [micro:bit](https://www.sparkfun.com/products/14208) development platform...

A basic case with some not so basic features. The Argon POLY+ Raspberry Pi 4 Case uses a three-piece snap-fit ​​plastic design to protect your Pi 4...

These headers are made to work with the Teensy 4.1, Teensy 3.6, and Teensy 3.5 development boards. Each set of headers allows for your Teensy to b...

Thermally Conductive Adhesive Transfer Tapes are designed to provide a preferential heat-transfer path between heat-generating components and heat ...

These are the surface mount 50 pin 0.5mm Board to Board Double Slot Male Connectors found on the Alchitry FPGA boards. These headers allow for Alc...

These are the surface mount 50 pin 0.5mm Board to Board Double Slot Female Connectors found on the Alchitry FPGA boards. These headers allow for A...

Have a project that needs some good power? Do you like free power provided by our friend, Mr. Sun? This solar panel charger is a lightweight, ultr...

Affectionately dubbed \"Fairy Lights\" for their similar appearance, these addressable RGB LED string lights are a great way to light up any proje...

Here is a tiny 4-pin Qwiic 1mm JST connector. This connector mounts to allow you to connect your cable vertically, great for tight spaces. This co...

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi...

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi...

Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid pin connector on either end. They have the flexibility of stra...

This is a 2x18 pin female header. Each pin has a spacing of 0.1\" in-between each other. This header mates perfectly with the [Alchitry Br Prot...

Poke Home Connectors have been featured on a number of our boards over the last few years by providing a simple screw-terminal-type connector for ...

These are simple 6-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A, this terminal can accept 30 to 18AWG wire. The 2.54mm p...

These stackable headers are made to work with the [SparkFun Qwiic Shield for Arduino Nano](https://www.sparkfun.com/products/16130) or any comparab...

You\'ll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A ...