Sparkfun

These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 10...

These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1K ...

These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 10K...

These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 330...

This is a simple 4-pack of momentary, multicolor buttons, great for all sorts of projects! previous iterations of multicolor buttons, this pack\'s ...

This is a 500mm long 4-conductor cable with 1mm JST termination. It's designed to connect Qwiic enabled components together but can be used for ot...

This is a 100mm long 4-conductor cable with 1mm JST termination. It's designed to connect Qwiic enabled components together but can be used for ot...

This is a 50mm long 4-conductor cable with 1mm JST termination. It's designed to connect Qwiic enabled components together but can be used for oth...

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other...

Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based...

The SparkFun 5V/1A LiPo Charger/Booster is a no-nonsense circuit for generating one amp from a Lithium Polymer battery at 5V. This LiPo charger is ...

Sometimes referred to as \"spade connectors,\" these quick disconnects are really useful as power connectors in prototyping or in projects that ar...

The SparkFun Adjustable LiPo Charger is a single-cell lithium polymer (LiPo) and lithium ion battery charger. Because it's adjustable, this charger...

This isn\'t your ordinary power supply. The Global Power Supply is a 15V, 4.34A power device specifically designed to work with the [JustBoom Amp ...

The Mountable MI:pro is a simple and compact protective case for the micro:bit. These cases feature a three-layer construction style with ability ...

This is a mountable SPDT slide switch---great for use as a general control switch. The pins are spaced by 3.7mm (0.14\"), making breadboard use no...

These stackable headers are add a great deal of connectivity to your next project where you need 12, stackable, pins in a line. Each order includes...

These standard female headers add a great deal of connectivity to your next project where you need 12-pins in a line. Each order includes one 1x12...

This Digital LED Voltmeter measures the voltage at a particular point of the system it has been hooked up to and then provides a readout on its th...

These headers are made to work with the SparkFun ESP32 Thing to connect to ESP32 Shield boards. Each set of headers makes your ESP32 Thing easily ...

This is a unique two-cell AA battery holder. The 6" (~150mm) cable has been terminated with a JST-PH connector. We used to recommend using this ...

These are 101mm long 26AWG jumpers with male connectors on both ends. Use these to jumper from any female header on any board to any other female ...

This 2x20 male header has the same number and spacing of pins as a Raspberry Pi but is best served when used in conjunction with the Pi Zero since...

The Raspberry Pi Zero Case has been designed to fit both the Pi Zero and the Pi Zero W. These official cases consist of several parts and protect t...