Sparkfun

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi...

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi...

Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid pin connector on either end. They have the flexibility of stra...

This is a 2x18 pin female header. Each pin has a spacing of 0.1\" in-between each other. This header mates perfectly with the [Alchitry Br Prot...

Poke Home Connectors have been featured on a number of our boards over the last few years by providing a simple screw-terminal-type connector for ...

These are simple 6-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A, this terminal can accept 30 to 18AWG wire. The 2.54mm p...

These stackable headers are made to work with the [SparkFun Qwiic Shield for Arduino Nano](https://www.sparkfun.com/products/16130) or any comparab...

You\'ll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A ...

You\'ll have no need for a screwdriver with this terminal! This is a 4-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A ...

You\'ll have no need for a screwdriver with this terminal! This is a 2-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A a...

Why use a heatsink and a case, when you can use a heatsink case?! This black, anodized aluminum case for the Raspberry Pi 4 will give you 10-15°C ...

This 4-pin, ATX, right angle connector mates up to the standard 4-pin computer peripheral port often found on ATX power supplies. This connector w...

This sturdy carrying case is great for carrying anything from tiny components to medium-sized tools. With its adjustable dividers, it could be use...

This is the same 10Ah battery pack that provides power to the [SparkFun Jetbot](https://www.sparkfun.com/products/16417)! The battery pack support...

This is a Screw Terminal with 3.5mm pitch pins. Comes in 2, 3, or 4 positions and have the really cool feature of slide-locking together to form an...

This is a super small, 2x5 pin female PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27...

This is a super small, 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm ...

Sometimes we want our projects on, but sometimes we want to turn them off for a while to save power. The SparkFun Nano Power Timer will run while ...

Have you ever wanted to mount 5mm LEDs to the side of your board? We got these in for our RedBoard Edge and loved them. They are really just small...

Cherry MX switches are great for building your own keyboards. Whether you are looking to build a full sized 108-key keyboard, your own 10-key, or j...

Cherry MX switches are great for building your own keyboards. Whether you are looking to build a full sized 108-key keyboard, your own 10-key, or j...

Cherry MX switches are great for building your own keyboards. Whether you are looking to build a full sized 108-key keyboard, your own 10-key, or ...

The SparkFun LiPo Charger Plus is the souped-up power option in the SparkFun line of single-cell lithium polymer (LiPo) battery chargers. With this...

These stackable headers are made to work with the [SparkFun ESP32 Thing Plus](https://www.sparkfun.com/products/14689) to connect to shield with a...