Sparkfun

Here at SparkFun, we refuse to leave \'good enough\' alone. That\'s why we\'re adding to our line-up of Arduino-compatible microcontrollers once mo...

Here at SparkFun, we refuse to leave \'good enough\' alone. That\'s why we\'re adding to our line-up of Arduino-compatible microcontrollers once mo...

This is the LilyPad Arduino USB board, controlled by an ATmega32U4 with the Arduino bootloader. It has a built in power supply socket and an on/of...

The LilyPad Simple Power is a simple e-textile board with a 500mA charge rate that lets you connect and charge a lipo battery and switch it on or ...

This is about 360 yards of conductive thread spun from stainless steel fiber and wound on a spool. You can use it as a creative way to connect var...

Sometimes you\'ve got way too many inputs, or outputs... or both. How are you going to get them all connected to your Arduino? The Mux Shield, tha...

The LilyTwinkle is a tiny little LilyPad board designed to add some twinkle to your project. Even though it\'s as small as some of the LilyPad sen...

These sew-on fabric snaps are the same size used on the LilyPad SimpleSnap boards. You can sew these into your project to allow for easy removal or...

We\'ve been prototyping for a long time on these awesome little plastic plates but it\'s time for an upgrade. This version still holds an Arduino ...

It\'s blue! It\'s thin! It\'s the Arduino Pro Mini! SparkFun\'s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloa...

It\'s blue! It\'s thin! It\'s the Arduino Pro Mini! SparkFun\'s minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloa...

The LilyPad MP3 Player is your all-in-one audio solution, containing an Arduino-compatible microcontroller, MP3 (and many other formats) audio dec...

Apply 5V and be shaken by this small, but powerful vibration motor. Works great as a physical indicator without notifying anyone but the wearer. T...

It\'s blue! It\'s skinny! It\'s the Arduino Pro! SparkFun\'s minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader...

It\'s blue! It\'s skinny! It\'s the Arduino Pro! SparkFun\'s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloade...

The LilyTiny is a tiny little LilyPad board designed to add flashy functionality to your project without taking up a lot of room. Even though it\'s...

This is 30 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile project...

The name says it all on this one. An ATmega328P in DIP package, pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you t...

Do you ever wish your Arduino was more musically talented? Or maybe your project could use some cool sound effects. The SparkFun Musical Instrument...

The Arduino Funnel I/O (Fio) is a board designed by Shigeru Kobayashi, based on the original design from [LilyPad](http://www.sparkfun.com/commerc...

OBDII is an on board diagnostics standard that is used on a large variety of cars. OBD-II provides access to numerous data from the engine control ...

This is the newest revision of our [FTDI Basic](https://www.sparkfun.com/products/retired/8772). We now use a SMD 6-pin header on the bottom, whic...

The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of thi...

The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The VCC pins of thi...