Sparkfun

This is a 300mm (1 foot) Male TNC to Male SMA cable with injection molded stress-relief boots. This is an excellent cable for connecting one of our...

When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or outside with a clear view of the sky while y...

This is the 6.5ft version of the Fast Charging USB C to C cable. Charging or powering your USB Type C device can be daunting and finding a cable t...

Charging or powering your USB Type C device can be daunting. Finding a cable that fits both your interface and provides safe power levels is a new...

Charging or powering your USB Type C device can be daunting. Finding a cable that fits both your interface and provides safe power levels is a new...

HARTING T1 Industrial Single-Pair Ethernet (SPE) Products feature a highly optimized, high-frequency design, shielding, and high mechanical robustn...

This is a simple three wire JST to Molex cable. There is a 3-pin Molex connector on one end, 3-pin JST connector on the other both with 0.1\" spac...

This is the 36mm 16-way 0.5mm-pitch Flexible Printed Circuit used to interconnect smôl boards side by side. This FPC has an offset (step) of 18mm....

This is the 100mm 16-way 0.5mm-pitch Flexible Printed Circuit used to interconnect smôl boards end to end. *** _**smôl** is an ecosystem of ...

TRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRS stands for \"Tip, Ring, Sleeve.\...

This is the 36mm 16-way 0.5mm-pitch Flexible Printed Circuit used to interconnect smôl boards. *** _**smôl** is an ecosystem of miniature pr...

This is a 6-pin JST-ZHR connector terminated with breadboard compatible male pins. This is a handy cable for various sensors, radios and other dev...

This is a 4-pin JST-ZHR connector terminated with breadboard compatible male pins. This is a handy cable for various sensors, radios and other devi...

This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The cable features a 1.25mm pitch ...

This is a handy cable for connecting a five pin GHR-05V type locking connector to breadboard friendly male pins. The cable features a 1.25mm pitch ...

This is an Audio to Alligator Cable, an 8in. long 22 AWG wire with two alligator clips at one end and a 2.5mm mono plug at the other. **Documen...

This is a handy cable for connecting a six pin GHR-06V-S type locking connector to a four pin GHR-04V-S type locking connector. The cable features...

This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured ...

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. The cable...

This is a handy cable for connecting a four pin GHR-04V type locking connector to breadboard friendly male pins. These cables are already included...

This product is designed to connect the [RTK Surveyor](https://www.sparkfun.com/products/17369) product line to the popular [Serial Telemetry Radio...

This is a simple 10-pin cable. There is a 10-pin connector with 0.1" spacing on both ends.

This USB 2.0 Type-C cable is perfect for use with your Raspberry Pi 4 and other USB Type C boards. USB Type-C Connectors and Cable Assemblies offer...

This is an inexpensive 3-foot-long HDMI to Micro HDMI cable that you can use to hook up your Raspberry Pi 4 and 5 to a suitable monitor or TV. Hec...