Sparkfun

This is a USB 2.0 type B to Mini-B 5-pin black cable. You know, the mini-B connector that usually comes with USB Hubs, Cameras, MP3 players, etc. W...

This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi 3, 2, and B+ so you can easily connect to the low-level peripherals and get ...

This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured...

This is your simple three conductor sensor cable with electrode pad leads. These cables are 24\" long and feature a 3.5mm audio jack connector on o...

USB On-The-Go is a really useful USB specification! It allows some small devices that would usually be unable to act as a host to have limited host...

TRRS connectors are the 3.5mm audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for \"Tip, Ring, ...

Behold, the Hydra! This USB power cable probably looks a lot like something you\'ve hacked together before. We do it all the time, because what is...

There are a lot of devices out there that still communicate over RS232 but we bet your new laptop isn\'t one of them. Don\'t worry, though, we\'ve...

This is a USB 2.0 type A to Mini-B 5-pin cable. You know, the mini-B connector that usually comes with USB Hubs, Cameras, MP3 players, etc. You ca...

Integrating Ethernet support into your project is a great way to relay data through a local area network and even bounce information out to the int...

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look...

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look...

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look...

USB 2.0 type A to micro USB 5-pin. This is a new, smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Mi...

You might have seen these cables used in computers. They are typically used to bring USB connections from a motherboard to the external case, or t...

Once you\'ve hacked everything, why not go out in the garage and hack your car? This cable allows you to access the pins on your car\'s OBDII conn...

These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable of grabbing very ...

This is a handy AVR programming cable that incorporates both the 10-pin and 6-pin ISP programming interfaces. Cable is about 12\" long and mate...

This 3ft Category 6 (CAT 6) Ethernet cable is the solution to your internet working needs. With a speed of up to 500MHz you can connect to your LA...

This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that\'s usually used for printers...

These are various led cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pairs....

These are various led cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. High quality coax cable with s...

These are various led cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pairs...

These are various led cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. **Features:** * 36\" Long