Stepper Motors

Description: This is a simple, but very powerful stepper motor with a 4-wire cable attached. This is a Bipolar Motor. Features: Step Angle ...

These steppers are a great way to get things moving, especially when positioning and repeatability is a concern. Features: Step Angle (deg...

This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 280 mA at 7.4 V, allowing for a holding torque...

Mainly used in air conditioner louver, small cooling and heating fan etc. Stable and all technical parameters are qualified for national electroni...

These small steppers are a great way to get things moving, especially when positioning and repeatability is a concern. This is a Bipolar motor. ...

This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1000 mA at 2.7 V, allowing for a holding torqu...

This is the motor you want if you are looking for a low cost unipolar stepper that needs to do some work. Motor Controller and Connection Th...

This coated steel mounting bracket provides a simple means of attaching a NEMA-17 sized stepper motor to a flat surface. It has two sets of mountin...

This hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws...

This NEMA-17 motor generates 3.6 Kg-cm of holding torque at 1.7 Amps. It comes with the rear shaft exposed, so you can mount anencoder or shaft cou...

These steppers have a threaded shaft, which allows them to be used as a linear actuator. As the motor runs, it moves along the shaft at a specific...

This high-speed bipolar stepper with a rear shaft has a 1.8° step angle and 11 kg cm of torque at low speeds. This NEMA-23 motor generates 12.6 kg...

This coated steel mounting bracket provides a simple means of attaching a NEMA-23 sized stepper motor to a flat surface. It has two sets of mounti...

This NEMA-11 motor has an integrated Planetary gearbox with a 26 103 / 121 :1 ratio. It comes with the rear shaft exposed, so you can mount an enco...

This NEMA-17 motor has an integrated Planetary gearbox with a 50 4397 / 4913 :1 ratio. It comes with the rear shaft exposed, so you can mount an en...

This NEMA-17 motor has an integrated Planetary gearbox with a 13 212 / 289 :1 ratio. It comes with the rear shaft exposed, so you can mount an enco...

This NEMA-14 motor generates 1.4 Kg-cm of holding torque at 1 Amp. It comes with the rear shaft exposed, so you can mount anencoder or shaft coupl...

This black anodized aluminum bracket lets you securely mount typical NEMA 17-size stepper motors to your project. The bracket features several slot...

This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator ...

This coated steel mounting bracket provides a simple means of attaching a NEMA-11 sized stepper motor to a flat surface. It has two sets of mounti...

This NEMA-23 motor generates 12 kg-cm of torque at 2.8 Amps. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler. ...

This NEMA-11 motor generates 600 g-cm of holding torque at 0.67 Amps. It comes with the rear shaft exposed, so you can mount an encoder or shaft c...

This NEMA-17 motor has an integrated Planetary gearbox with a 26 103 / 121 :1 ratio. It comes with the rear shaft exposed, so you can mount an enco...

This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each ...