3327 - 42STH38 NEMA-17 Bipolar Stepper with 26.85:1 Gearbox
All prices are VAT included
This NEMA-17 motor has an integrated Planetary gearbox with a 26 103 / 121 :1 ratio. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler .
At 1.7 Amps (maximum current), this stepper motor can produce a maximum torque of 77 kg-cm. However, the gearbox is only rated for 30 kg-cm of continuous torque, and 80 kg-cm for brief overloads. Loading this gearbox stepper beyond the torque rating of the gearbox will shorten its useful life.
When connected to a 1067 - PhidgetStepper Bipolar HC, the 3327 has a maximum speed of approximately 23 RPM at no load. At the output of the gearbox, the step angle is a little under 0.07°. When using the step angle in calculations, you should derive the exact step angle by dividing 1.8° by the gearbox reduction ratio.
The 3327 stepper motor connects to a bipolar motor controller such as the 1067 - PhidgetStepper Bipolar HC.
The following table shows how to connect the motor wires to the board connectors to produce a clockwise rotation in the stepper motor when increasing position. To wire for counter-clockwise rotation when increasing position, reverse the red and blue wires.
| Wire Color | Black | Green | Red | Blue |
| Board Connector | TO | B | C | D |
Note: Make sure to unplug the power cord from the motor controller before switching wires around.
|
Connecting the motor directly to a power supply will destroy the motor and void the warranty. If you want to check your motor make sure it is connected to a constant current / chopper drive controller. |
Product Features
- High Torque
- 0.067° Step Angle
- Motor can produces 30 kg-cm holding torque @ 1.7A
- NEMA-17 Bipolar 4-wire
- Rear shaft exposed for compatibility with encoders
Motor Properties
| Motor Type | Bipolar Stepper |
| Manufacturer Part Number | 42STH38-1684B / 36JXS60K26 |
| Step Angle | 0.067° |
| Step Accuracy | 5 % |
| Holding Torque | 30 kg·cm |
| Rated Torque | 30 kg·cm |
| Maximum Speed (w/1063 Motor Controller) | 21 RPM |
| Maximum Speed (w/1067 Motor Controller) | 174 RPM |
| Acceleration at Max Speed (w/1067 Motor Controller) |
600000 1/16 steps/sec² |
Electrical Properties
| Recommended Voltage | 12V DC |
| Rated Current | 1.7 A |
| Coil Resistance | 1.7 Ω |
Physical Properties
| Shaft Diameter | 8 mm |
| Rear Shaft Diameter | 3.8mm |
| Mounting Plate Size | NEMA - 17 |
| Weight | 503 g |
| Number of Leads | 4 |
| Wire Length | 300 mm |
Gearbox Properties
| Gearbox Type | Planetary |
| Gear Ratio | 26 103 ⁄ 121 : 1 |
| Backlash Error | 1 1 ⁄ 2 ° |
| Maximum Strength of Gears | 30 kg·cm |
| Shaft Maximum Axial Load | 49.1 No |
| Shaft Maximum Radial Load | 98.1 No |