Skip to content

Language

SKU WRL-21605

Nordic nRF52840 BLE Module (MDBT50Q-1MV2)

Original price €18,96 - Original price €18,96
Original price
€18,96
€18,96 - €18,96
Current price €18,96

All prices are VAT included

Availability:
Out of stock
Availability:
Out of stock
Availability:
On order
Shipping: 2-4 Weeks
Request Quantity Discount and Information

Raytac's MDBT50Q is a BT 5.2 stack (Bluetooth® low energy or BLE) module
designed based on Nordic nRF52840 SoC solution, which incorporates: GPIO, SPI, UART,
I2C, I2S, PMD, PWM, ADC, NFC and USB interfaces for connecting peripherals and sensors.

It features an embedded 2.4GHz transceiver supports Bluetooth 5.2, IEEE 802.15.4
(Thread & Zigbee) & 2.4Ghz RF & ANT+ upon customer's preference. Compact size with (L) 15.5 x (W) 10.5 x (H) 2.05 or 2 mm. Low power requirements, ultra-low peak, average and idle mode power consumption. Full coverage of BLE software stack. BLE & RF transmission switching helps products fit all operation system and most
hardware

**Features:**

* Bluetooth 5, IEEE 802.15.4, 2.4 GHz transceiver
- -95dBm sensitivity in 1Mbps Bluetooth low energy (BLE) mode
- -103dBm sensitivity in 125Kbps BLE mode (long range)
- +8 dBm TX power (down to -20 dBm in 4 dB steps)
- On-air compatible with nRF52, nRF51, nRF24L and nRF24AP Series
- Programmable output power from +8dBm to -20dB
- RSSI (1dB resolution)
- Supported data rates:
- Bluetooth 5: 2Mbps, 1Mbps, 500kbps, 125kbps
- IEEE 802.15.4-2006: 250 kbps
- Proprietary 2.4 GHz: 2 Mbps, 1 Mbps
* ARM Cortex –M4 32-bit processor with FPU, 64 MHz
* Memory: 1MB flash / 256KB RAM
* HW accelerated security
- ARM TrustZone Cryptocell 310 security subsystem
- 128 bit AES/ECB/CCM/AAR co-processor (on-the-fly packet encryption)
* Advanced on-chip interfaces
- USB 2.0 full speed (12Mbps) controller
- QSPI 32MHz interface
- High speed 32MHz SPI
- Type 2 near field communication (NFC-A) tag with wake-on field
- Programmable peripheral interconnect (PPI)
- 48 general purpose I/O pins
- EasyDMA automated data transfer between memory and peripherals.
* 12 bit, 200ksps ADC – 8 configurable channels with programmable gain
* 4 x 4 channel pulse width modulator (PWM) units with EasyDMA
* Audio peripherals: I2S, digital microphone interface (PDM)
* 5 X 32-bit timers with counter mode
* Up to 4 x SPI masters / 3 x SPI slaves with EasyDMA
* Up to 2 x I2C compatible 2-wire masters / slaves
* 2 x UART(CTS/RTS) with EasyDMA
* Quadrature decoder (QDEC)
* 3 x 24-bit real-time counters (RTC)

**Documents:**

* [Datasheet](https://cdn.sparkfun.com/assets/4/7/4/3/8/_nRF52840__MDBT50Q-1MV2___MDBT50Q-P1MV2_Ver.K_spec.pdf)