generic

These 3/8" -long hexagonal female-female aluminum standoffs keep parts spaced 0.375 inches (9.5 mm) apart. They are like elongated, 3/16″-wide hex...

These hexagonal male-female aluminum standoffs keep parts spaced 0.375" (10 mm) apart and are great for building a multi-level robot chassis. Both ...

These 3/8" -long hexagonal female-female aluminum standoffs keep parts spaced 0.375 inches (9.5 mm) apart. They are like elongated, 3/16″-wide hex...

These hexagonal male-female aluminum standoffs keep parts spaced 0.375" (10 mm) apart and are great for building a multi-level robot chassis. Both ...

These 5/16" -long hexagonal female-female aluminum standoffs keep parts spaced 0.313 inches (7.9 mm) apart. They are like elongated, 3/16″-wide he...

These 5/16" -long hexagonal female-female aluminum standoffs keep parts spaced 0.313 inches (7.9 mm) apart. They are like elongated, 3/16″-wide he...

These 7/16" -long hexagonal female-female aluminum standoffs keep parts spaced 0.438 inches (11 mm) apart. They are like elongated, 3/16″-wide hex...

This 130-size brushed DC motor has a recommended operation voltage of 3 – 12 V and is used in the larger Pololu plastic gearmotors. Approximate sp...

330 uF, 35 V radial electrolytic capacitor. We use these capacitors for power filtering/noise suppression on our Dual VNH2SP30 and VNH3SP30 motor ...

This crimping tool can be used to crimp both male and female versions of our JST RCY connector crimp pins , JR crimp pins , Futaba J crimp pins , a...

This crimping tool can be used to crimp both male and female versions of our Tamiya connector crimp pins , mini Tamiya connector crimp pins , JST R...

This connector adapts to a 5.5 × 2.1 mm DC barrel jack to a pair of screw terminals spaced approximately 5 mm (0.2″) apart. The terminals are labe...

This connector adapts a 5.5 × 2.1 mm DC barrel plug to a pair of screw terminals spaced approximately 5 mm (0.2″) apart. The terminals are labeled...

This is a standard PCB-mountable barrel-type jack for DC power adapters with 2.1 mm center holes. This is a standard PCB-mountable barrel jack f...

This pack contains everything you need to add up to three female Futaba J connectors — the connectors found on many Futaba servos — to custom cable...

This pack contains everything you need to add up to three male Futaba J connectors — the connectors that mate with those found on many Futaba serv...

This monochrome white OLED display features a standard SH1106 SPI interface and a 128×64-pixel resolution. With an active area measuring 1.3″ diag...

This 0.05" diameter, 1.75" long by 0.6" wide flat-ended hex key works with small hex screws, such as the #4-40 set screws included with some of ou...

IDC socket 2.54mm 6-pin (with strain relief clip) for use with 2×3-pin shrouded male header . These connectors can be crimped onto ribbon cable ...

This pack contains everything you need to add up to three female JR connectors — the connectors commonly found on generic RC servos — to custom ca...

This pack contains everything you need to add up to three male JR connectors — the connectors that mate with those commonly found on generic RC se...

This JST RCY plug is also referred to as a BEC (battery eliminating circuit) connector and is commonly used with battery packs for RC applications...

This JST RCY plug is also referred to as a BEC (battery eliminating circuit) connector and is commonly used with battery packs for RC applications...

This female JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so tha...