Tamiya 70140 Pulley (S) Set
All prices are VAT included
The Tamiya 70140 small pulley set contains eight pulleys of different diameters for use with other Tamiya products . The included assortment of bushings allow the pulleys to be mounted on various shaft types with the pulley either idling on the shaft or rotating with it.
|
Instructions for Tamiya 70140 Pulley (S) Set page 2. |
|---|
The Tamiya 70140 Pulley (S) Set contains parts compatible with other Tamiya products . The included pulleys can be mounted directly to parts such as the Tamiya 70098 Universal Plate Set , or they can be mounted using shafts such as those included in the Tamiya 70105 3mm Diameter Shaft Set .
The set contains eight pulleys of various sizes along with an assortment of single and double bushings that make the pulleys compatible with round and hexagonal shafts of both 3 mm and 2 mm diameters. Depending on the bushing, the pulleys can either idle on a shaft or rotate with it. The double bushings allow for pulleys to be connected and sit next to each other on the same shaft. Other parts in the set include a belt guide for use with a motor shaft, belts, and a screw and nut set.
Included Parts
- Two 30 mm-diameter pulleys
- Two 20 mm-diameter pulleys
- Four 11 mm-diameter pulleys
- Two single and two double 2 mm hexagonal bushings
- Two single and two double 3 mm hexagonal bushings
- Two single and two double 3.1 mm round bushings (allow pulleys to idle on 3 mm hexagonal and round shafts)
- Two single and two double 2.9 mm round bushings (allow pulleys to rotate with 3 mm round shafts)
- Two single and four double 2.1 mm round bushings (allow pulleys to idle on 2 mm round shafts)
- Four single and two double 1.9 mm round bushings (allow pulleys to rotate with 2 mm round shafts)
- One belt guide
- Belts
- Six 3 x 18mm screws
- Six 3 x 18mm tapping screws
- Six 2 x 18mm screws
- Ten 3 mm nuts
- Ten 2 mm nuts
- Four 3 mm plastic nuts
Tamiya Pulley Sets
- Pulley Unit Set 70121
- Pulley (S) Set 70140 (This product.)
- Pulley (L) Set 70141