3-Pin Female JST PH-Style Cable (30 cm) for Sharp Distance Sensors

This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that works with Sharp analog distance sensors that have mating PH connectors. The other ends of the wires are unterminated; they can be cut to length to match your application. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.

This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that works with Sharp analog distance sensors that have mating PH connectors, such as the 4-30 cm GP2Y0A41 , the 10- 80 cm GP2Y0A21 , and the 20-150 cm GP2Y0A02 .

Note: This cable is not compatible with the 2-15 cm Sharp GP2Y0A51 , which has a JST ZH connector. For a cable that works with that sensor, consider the 3-Pin Female JST ZH-Style Cable .

The other ends of the wires are unterminated; they can be cut to length to match your application. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal. The connector pins have a 2 mm pitch.

You can use our male or female crimp pins and a 0.1" 3×1 crimp connector housing to make a connector for the unterminated end of the cable that is compatible with standard solderless breadboards , perfboards, and the 0.1" male and female headers commonly found on microcontroller boards like Arduinos and Orangutan robot controllers .

We also carry versions of this cable with pre-crimped male terminals and with pre-crimped female terminals .