Mini Pushbutton Switch: PCB-Mount, 2-Pin, SPST, 50mA (5-Pack)
All prices are VAT included
These small, two-pin, normally open, momentary tactile buttons are intended for mounting to PCBs, but they can also be plugged into standard 0.1" breadboards. They work well as reset buttons and can be connected to microcontroller inputs to serve as a user -interface components. These pushbuttons are sold in packs of 5 .
|
Mini 2-pin, PCB-mount pushbutton switch on a breadboard. |
|---|
Overview
These small, two-pin, normally open, SPST momentary pushbuttons are intended for mounting to PCBs, but they can also be plugged into standard 0.1" breadboards as shown in the picture to the right. We use them as reset buttons and user pushbuttons in several of our products, including the 3pi robot and most of our Orangutan robot controllers . Note that this button should not be used with voltages above 12 V, and it should not be used to switch currents greater than 50 mA to 5-pack .
Specs
- Activation force: 6 oz
- Maximum rating: DC 12V / 50mA
- On resistance: ≤ 50 mΩ
- Off resistance: >100MΩ
- Life: >100,000 cycles
 |
Dimensions (in mm) of mini pushbutton switch: PCB-mount, 2-pin, SPST, 50mA. |
|---|
Note: High-volume orders of this product might be partially or fully shipped in bulk packaging rather than individually packaged groups of five buttons. Please contact us if you do not want your order shipped with bulk packaging.