micro:Mate - a Mini & Thin Expansion Board for micro:bit (Gravity Compatible)

micro:Mate is a tiny micro:bit I/O expansion board for learning electronics and building DIY projects.
micro:Mate expands 6 sets of 3-pin I/O interfaces, capable of connecting DFRobot Gravity series modules, servo motors , sensors and jumper wires . Additionally, Pin 8, 12, 16 support voltage switch between 3V-5V, allowing up to 5V 2A digital (PWM) output.
micro:Mate is in the same dimension as micro:bit. It connects to micro:bit through contact pins (with spring loaded), ensuring easy, compact and secure connection. The rubber bumpers and the 3.5mm audio jack on the back side keep the expansion installed stably on the board, meanwhile prevents reversed connection.

Note:
The mounting screws should be well tightened to ensure a secured connection.
micro:Mate only supports 3V (3.3V) analog input from Pin 0, 1, 2. The Micro USB
Power port on Micro:Mate cannot be used for data transmission.
Components with large power consumption should be connected to Pin 8, 12, 16, with 5V power supply.

Project 1: OBLOQ-IoT Module +Micro:bit IoT Flower Watering

Hardware list:
Gravity: UART OBLOQ – IOT Module (Microsoft Azure)
Micro:Mate - A Mini Expansion Board for micro:bit (Gravity Compatible)
Micro:bit - an Educational & Creative Tool for Kids
9g Metal Gear Micro Servo (1.8Kg)
One bottle and part of tube
Gravity: Analog Capacitive Soil Moisture Sensor- Corrosion Resistant

Project 2: Microbit Projects: Yes/No Bear

There are 2 possible answers. Either yes or no. We randomly generate the outcome when a button is pressed. When the answer is yes, the display will show Y & the tilt servo will respond. When no, the display will show N and pan servo will respond.
Part needed
2 x 9G servo motor
1 x microbit
1 x micro:mate(breakout board)
1 x Pan tilt kit
1 x stuffed toy bear

Project 3: Micro:bit car with DFRobot gamepad

What do you need?
Arcylic car chassis with 3 wheels (kit)
L9110 Dual Channel Motor Driver Module
micro:bits x 2
micro:bit mate
micro:gamepad
Double sided tape to stick the battery holder to the acrylic
Glue gun to immobilize the back wheel
Dupont cables

Project 4: LED writing board (micro:bit compatible)

The LED writing board is created using a photo frame that is surrounded with LED strip lights. When button A is pressed, the led strip turns white and flash. When button B is pressed, a random color is generated. To off, press button A and B together.
Hardware components:

• photo frames
• RGB individually addressable LED strip (neo pixels)
• microbit
• micro:mate (breakout board)

Microbit Project 5: Basketball score counter

Part needed

• IR sensor *1
• micro:bit *1
• micro:mate(breakout board) *1
• Gravity: Digital Speaker Module *1
• Dupont cables *1
• Basketball hoop *1

Project 6. Magnet switch lamp with micro:bit
Components list

• Micro:bit
• Micromate
• magnet
• 8 x ws2812 5050 led ring
• Dupont cables
• Christmas Ornaments
• 
  

Project 7: Micro:bit Missile Launcher

Hardware components:

• 9G servo motor *2
• micro:bit *1
• micro:mate(breakout board) *1
• Pan tilt kit *1
• Dual-axis XY Joystick Module *1
• 2n2222 transistors *1
• WLtoys Missile shooter *1
• Dupont cables

Project 8. micro:bit Christmas tree

Hardware components:

• Micro:bit *1
• Micro:Mate - A Mini Expansion Board for micro:bit *1
• 360 servo *1
• DFPlayer - A Mini MP3 Player For Arduino *1
• Dupont cables *1