Gyro Breakout Board - IXZ500 Dual 500°/s
All prices are VAT included
This is a breakout board for the dual axis IXZ-500 gyro. The IXZ-500 is a very small gyroscope, designed to sense angular velocity on the x and z axes (pitch/yaw). The gyro features a primary output with a ±500°/s full scale range, for measuring higher speed motions, and has a secondary output with a ±110°/s full-scale range, for sensing more precise movements. These dual outputs allow the system designer to use an analog-to-digital-converter (ADC) with two fewer bits, saving overall system cost.
This breakout board includes the IXZ-500 and all components as shown - a 2.8VDC LDO voltage regulator, and filtering components. All necessary pins of the IXZ-500 are brought out to a 9-pin 0.1" pitch header.
Not sure which gyro is right for you? Our Accelerometer and Gyro Buying Guide might help!
Features:
- IXZ-500 Dual Axis Gyroscope
- On-board 2.8VDC voltage regulator
- All necessary filtering components
- Pins broken out to a 0.1" pitch header
- Integrated X- and Z-axis gyros on a single chip with in-plane mounting
- Two separate outputs per axis for higher speed motions and lower-speed precise movements:
- 500°/s full scale range (higher speed)
- 110°/s full scale range (high precision)
- Integrated amplifiers and low-pass filters
- Auto Zero function for bias calibration
- On-chip temperature sensor
Dimensions:
- Board: 0.65x0.9"
Documents:
- Schematic
- IXZ-500 Datasheet
- Wiring Example (IXZ-500)