Pololu

This NEMA 11-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 670 mA at 3.8 V, allowing for a hol...

Add quadrature encoders to the mini plastic gearmotors on your Romi chassis with this kit that uses a magnetic disc and Hall effect sensors to pro...

These magnetic discs can be used with our 20D mm metal gearmotors (extended motor shaft versions only) as part of a quadrature encoder system that ...

This connector is a triple-row, 12-pin (3×4), straight female header strip designed to match 0.1" male headers. Overview These 0.1" straight f...

This 12 V light-duty (LD) linear actuator with a 20:1 gear reduction can lift loads up to 50 kgf [110 lbs or 500 N] and can withstand static loads ...

This 1-meter long strip contains 60 RGB LEDs that can be individually addressed using a one-wire interface, allowing you full control over the col...

This 1-meter long strip contains 30 RGB LEDs that can be individually addressed using a one-wire interface, allowing you full control over the col...

The GP2Y0A21 Sharp distance sensor is a great way to add obstacle avoidance or motion sensing to your robot or any other project. With a detection...

The GP2Y0A02 is the longest-range optical distance sensor we carry, featuring a detection range of 8″ to 60″ (20 cm to 150 cm). The high maximum d...

The GP2Y0A51SK0F is the shortest-range Sharp analog distance sensor we carry, featuring a detection range of 0.8″ to 6″ (2 cm to 15 cm). The short...

The GP2Y0A41SK0F Sharp analog distance sensor features a detection range of 1.5″ to 12″ (4 cm to 30 cm). The shorter range gives you higher resolut...

This reflectance sensor module is designed for use with the Zumo shield for Arduino . It has six IR LED/phototransistor pairs that can be used for...

This tiny voltage inverter generates a negative output voltage corresponding to the voltage provided on its input, which can be from 1.8 V to 5.3 ...

This powerful synchronous switching boost regulator efficiently generates a finely adjustable output voltage between 4.5 V to 20 V from an input v...

This powerful synchronous switching boost regulator efficiently generates an output voltage of 5 V from an input voltage as low as 2.9 V while usi...

The Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over US...

The Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB...

The Tic T249 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our ...

The Tic T825 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our ...

The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our...

The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our ...

This breakout board makes it easy to use Toshiba's TB67S128FTG microstepping bipolar stepper motor driver, which features adjustable current limiti...

This discrete MOSFET stepper motor driver enables control of one bipolar stepper motor. It supports a wide 8 V to 50 V operating voltage range and...

This is a breakout board for ON Semiconductor's AMIS-30543 microstepping bipolar stepper motor driver, which features SPI-adjustable current limit...