Robotis

** DESCRIPTION AX-12A is a new version of the AX-12+ with the same performance but more advanced external design. It is ...

Premium quality 3 Pin cable. Compatible with Dynamixel AX servos and control devices (USB2Dynamixel, SMPS2, etc). 10pcs set

OpenCM9.04 is an open-source controller that runs under 32bit ARM Cortex-M3. The C version uses an exclusive 3PIN connector to control the ROB...

The XL-320 servo from ROBOTIS is so small you might mistake it for an ordinary hobby servo, but you would be missing out! Despite its diminutive s...

Premium quality 4 Pin cable. Compatible with Dynamixel RX and DX servos and control devices (USB2Dynamixel, SMPS2, etc). 10pcs set

The OpenCM 485 Expansion Board connects to the OpenCM9.04 controller to connect Dynamixels that support RS-485 and TTL. Battery connectors for bat...

U2D2 is a small size USB communication converter that enables to control and operate the DYNAMIXEL with the PC. It is smaller than the previous mo...

Dynamixel MX servo for advanced applications, features an MCU with PID algorithm control. This servo can rotate by 360° and continuously. Communic...

AX-18A has the same performance but more advanced external design than the AX-18F. AX-18A is 100% compatible with the AX-12+ at a 1:1 scale, with ...

DESCRIPTION - Exclusive gear set for DYNAMIXEL AX-18A - Compounded high strength engineering plastic is used. - No. 4 gear is made w...

The Dynamixel series robot actuator is a smart, modular actuator that incorporates a gear reducer, a precision DC motor and a control circuitry w...

Dynamixel MX servo for advanced applications, features an MCU with PID algorithm control. This servo can rotate by 360° and continuously. Communic...

TurtleBot is a low-cost, personal robot kit with open-source software. TurtleBot was created at Willow Garage by Melonee Wise and Tully Foote in N...

Premium quality 4 Pin cable. Compatible with Dynamixel RX and DX servos and control devices (USB2Dynamixel, SMPS2, etc). 10pcs sets

C Bracket for RX64 Dynamixel Servos. Includes: - OF-64H : 1 pc - Horn Idle : 1 pc - Cap Bearing: 1 pc - Wrench Bolt (M3*8) : 1 pc - Wrenc...

Dynamixel Shield was created to use RC100 and Dynamixel on arduino board. We provide dynamixel library for Dynamixel Shield, it can help you to u...

The LDS-01 is a 2D laser scanner capable of sensing 360 degrees that collects a set of data around the robot to use for SLAM (Simultaneous Localiz...

TurtleBot is a low-cost, personal robot kit with open-source software. TurtleBot was created at Willow Garage by Melonee Wise and Tully Foote in No...